Skip to main content

FINRA Principal Sign-off and Approval Records

For FINRA-regulated firms: principal-signed final approvals, FINRA record fields, filing options, deadlines and letters, and finding and exporting approval records.

Written by Austin Carroll

If your firm is regulated by FINRA, Warrant can require a registered principal to sign the final approval on the content FINRA regulates, record that signature on the asset, and keep a tamper-proof record of what was approved. This article is for admins setting it up, for principals who sign, and for compliance staff who need to produce records for a regulator.

Turning it on

FINRA approval records are switched on for your company by Warrant. Contact your Warrant team or [email protected] to turn them on, and to tell us which people are registered principals (with their CRD numbers). Warrant records who is a principal; you can't change that from Settings. Permanent FINRA records, described below, are a separate option that Warrant also turns on for you.

Once it's on:

  • Each approval flow has a Requires FINRA principal sign-off switch.

  • Every asset gets a set of FINRA record fields.

  • In the Approval section of an asset's Info tab, hovering over a reviewer who is a principal shows FINRA principal and their CRD number.

Mark the flows FINRA regulates

Sign-off applies per approval flow, so content that isn't FINRA-regulated keeps its usual review.

  1. Click Settings in the left sidebar, then under Company select Approvals.

  2. Open or add the flow for your FINRA-regulated communications.

  3. Turn on Requires FINRA principal sign-off.

  4. Make sure the flow's final stage includes at least one principal.

Only an admin can change this switch. Leave it off for content that isn't FINRA-regulated.

Signing the final approval

Earlier stages, such as legal or brand review, approve as usual. The final approval on a flow that requires sign-off must come from a registered principal, who signs it:

  1. Open the asset and click Approve.

  2. In the Principal signature box, read the statement and tick I agree to the statement above.

  3. Under Type your full name to sign, type your name exactly as it appears on your Warrant profile.

  4. Click Approve. The button stays unavailable until the box is ticked and your name is typed.

Warrant records the signature, the statement you agreed to, the time, and a fingerprint of the exact file you approved (for a link asset, the address that was approved). If the name you type doesn't match your profile, or your profile has no name, Warrant tells you and keeps the dialog open. If you aren't a registered principal, Warrant asks you to have a principal approve instead.

When you approve from the Approvals board, the signature box appears if your approval turns out to be the final sign-off. Fill it in and approve again.

Once an asset has been through a flow that requires sign-off, it stays FINRA-regulated: any later approval of it needs a principal's signature too, whichever flow it goes through.

Finalizing

If your company also keeps permanent FINRA records, a signed approval shows as Finalizing for a short time while its record is saved and checked. The asset becomes Approved once that's done. The Approval section on the asset's Info tab reads Saving the FINRA record… in the meantime.

A file larger than 5 GB can't be approved while permanent records are on; Warrant says so before anyone signs, so split or compress it and submit it again. If the record can't be saved yet, the section reads Approval signed — FINRA record not saved yet with the reason. Where it can be retried, click Retry saving the record. The principal doesn't need to sign again.

The FINRA record fields

Every asset has these fields in its Custom fields section on the Info tab:

  • Approved by principal, Principal approval date and Approved content SHA-256 (a fingerprint of the exact file the principal approved): recorded by Warrant when the principal signs. Nobody can edit them, admins included.

  • Date of first use: when the communication was first used. It can't be earlier than the principal approval date, and it can only be set after a principal has approved the asset. It locks once it has a value.

  • FINRA filing status: your firm's filing decision for the asset, chosen from your FINRA filing options (see below). New setups start with Not an advertisement, Relies on an earlier filing, File within 10 business days, Filed and Pre-use: waiting for letter.

  • FINRA filing reference: the filing reference number, once filed. It locks once it has a value. Some filing options need it: Warrant asks you to enter the reference before you can choose them.

By default, admins and the person who uploaded the asset can fill in the first-use date, filing status and filing reference. On Settings → Company → Fields, these fields carry a Warrant badge and can't be renamed, deleted or changed.

FINRA filing: options, deadlines and letters

Warrant tracks what your firm decided to do about filing each asset with FINRA, the deadline if there is one, and the letters FINRA sends back.

Set up your filing options

An admin sets the choices in the FINRA filing status field on the FINRA filing options card at the foot of Settings → Company → Fields. For each option, give it a name, choose what it does, and tick Reference number required if a filing reference must be entered with it. Click Add option for more, and Save options when you're done. What an option can do:

  • No filing: nothing more to track.

  • Relies on an earlier filing: nothing more to track; usually paired with a reference to that filing.

  • File within a deadline: the asset must be filed within the Business days you set (1 to 90), counted from its Date of first use.

  • Filed: wait for the letter: the asset is held as Pending FINRA until FINRA's letter is saved.

  • Pre-use: hold approval for the letter: the asset is held as Pending FINRA, it can't be approved until FINRA's letter for this review is saved, and it is never approved automatically.

Removing an option doesn't change assets that already use it.

Pending FINRA

When an asset that is in review or approved is given a filing status that waits for a letter, its status becomes Pending FINRA. An asset in draft keeps the decision and is held once it's submitted. While an asset is in review and Pending FINRA, nobody can approve it or request changes; the Approval section on its Info tab reads Pending FINRA · waiting for the letter. An asset that was already approved keeps its approval, and only its status shows that it's waiting on FINRA. Nobody can set or clear Pending FINRA by hand.

The hold ends when FINRA's letter is saved, or when someone changes the filing status to one that doesn't wait. On a held asset, only compliance can change the filing status: people who can see FINRA letters, or reviewers other than the person who submitted it.

Save FINRA's letter

  1. Open the asset. In the Approval section of the Info tab, the FINRA filing box shows the filing status, the reference and any deadline.

  2. Click Add FINRA letter.

  3. Choose the Letter type: Clean letter, Comment letter or Revision letter.

  4. Enter the Date on the letter, and optionally a FINRA reference number and a Note.

  5. Attach the letter as a PDF and click Save letter.

If the asset was held in review, it goes back to In Review: after a clean letter, for the principal to sign; after a comment or revision letter, for compliance to act on what FINRA asked, and the filing shows as FINRA asked for changes until a clean letter is saved. An asset that was already approved goes back to the status it had. If your company keeps permanent FINRA records, the letter is also added to the approval's record as filing evidence.

Letters are for compliance only. Submitters and business users can't see or download them, and aren't told that a letter came back. People who can see letters find them in the asset's Versions panel under FINRA letters (compliance only).

The FINRA filing page

Click FINRA filing in the left sidebar. It has three tabs:

  • Pending FINRA: assets waiting on FINRA's letter, with their filing option, reference and filing date. Assets where FINRA asked for changes are listed below them.

  • Deadlines: assets that must be filed within a deadline, with the due date and whether they're On track, Due soon or Overdue. Use Show to list one of these, or No first-use date for assets whose deadline hasn't started because the Date of first use isn't set.

  • Letters: every FINRA letter, which you can narrow by Type, date range (From, To), Product or Piece. Tick letters and click Download selected. Only people who can see letters get this tab.

A list shows up to 500 filings; if there are more, it says so. The asset's status, Pending FINRA, is also a status you can filter by in reports.

Deadline and letter notifications

When a filing deadline is two business days away, and again when it's overdue, Warrant notifies the person who recorded the filing decision, the asset's reviewers and your registered principals. They also hear when a saved letter ends a hold. The submitter isn't notified.

Deleted files are kept

While FINRA approval records are on, deleting a file or a version removes it from Warrant for everyone in your company, but Warrant keeps it, with its versions, approvals and comments, as part of your firm's records. Notifications about a deleted file are hidden too.

Auto-approval

Once an asset has been submitted to a flow requiring FINRA sign-off, or given a pre-use filing status, it is never approved automatically, whatever your auto-approval settings, and nobody can mark it Approved or Published without a principal's signed approval. Everything else your firm reviews keeps auto-approving as you've set it up, including an asset that has not yet been submitted to a FINRA flow, so if your FINRA content should never auto-approve, check your auto-approval settings.

Finding FINRA-regulated assets

Use the FINRA-regulated filter in search and reports to list only assets whose approval flow required principal sign-off. On the Search page it narrows Social Posts the same way, to posts that went through a flow requiring sign-off.

FINRA records: find and export for a regulator

When your company keeps permanent FINRA records, every principal-approved communication is kept as a locked, unchangeable record. Records stay available even if the working asset is deleted.

  1. Click FINRA records in the left sidebar.

  2. Search by any of Approval ID, Asset ID, Principal user ID, Filing reference, Record ID, or an Approved from and Approved to date range, and click Search.

  3. Each result shows when it was approved, the principal (with CRD number), the approval, and the date it is Retained until.

  4. Tick the records you need and click Export for regulator. Small exports download straight away. A large export is prepared in the background, and a Download export link appears when it's ready.

An export includes the exact approved asset, a readable summary of the approval and any filing evidence.

To add filing evidence, such as a FINRA filing result or a review letter, click Add evidence on a record, choose the Kind, enter a FINRA reference number or attach files (up to 10 at a time), add the Date received or sent and a Note if you like, and click Save to record. Evidence is saved permanently with the record and can't be edited or removed afterwards.

Who can use it

  • Sign final approvals: registered principals, as recorded by Warrant.

  • Mark a flow as requiring sign-off: admins.

  • FINRA records page: people whose role has the FINRA Records Export capability. If your company doesn't enforce capability permissions, admins. An admin can add this capability to a role in Roles & Permissions.

  • FINRA letters (see, save and download them): people with the FINRA records page, plus registered principals.

  • FINRA filing page and the FINRA filing box on an asset: people who can see letters, plus reviewers. With capability permissions on, reviewers are people whose role has the Approve capability. Without them, they are people an active approval flow names as an approver, directly or through a group, or who have a review waiting on them.

  • FINRA filing options: admins.

Related articles

Did this answer your question?